Salming Kobra 3 Women White/PaleBlue

Experience support where you need it most. The Kobra 3 model was designed with a reinforced KPU upper together with a new lace construction. Together with the new Recoil Energy foam midsole, which is extremely light, it provides excellent bounce properties and flexibility for indoor sports. SoftfoamTM foam has been placed in the heel impact zone, which has 70% better impact resistance than a conventional EVA midsole.

Features:

Wrap Around System Design (WAS Design)
In order to ensure the dexterity and stability of this shoe while maintaining its low weight, the rear end of the sole has been developed so that it extends over the heel area and thus encircles the entire heel area. In combination with LMS+ 8° and the perfectly built-in exoskeleton technology, this is a highly stable model that fits perfectly.

Exoskeleton
Special construction of the upper of the shoe - the outer skeleton stabilizes the foot when moving to the sides and thus reduces the pressure on the MTP joints (metatarsophalangeal joints). It is important to keep the foot stable, especially in the soft parts of the foot, where there is a lot of pressure on this part of the foot during sudden changes in direction - a high probability of injury.

LMS - Lateral Movement Stabilizer
Special lightweight double curved unit integrated into the center of the sole. Its task is to support the foot during fast and unexpected movements of the foot to the sides.

LMS Plus 8 ° + Rollbar technology
A quick stop in the movement of the foot to the side may result in the ankle being sprained. The LMS+ unit is designed with an 8% tilt to reduce the risk of this injury as much as possible.

The rounded inner edge of the sole allows the foot to be tilted inwards more and reduces the pressure on the toe edge. This allows the foot to bounce from more extreme positions and at the same time easier movement of the foot to a position that is common in low postures when playing floorball or squash.

Recoil Midsole + Recoil R heel insert
The cushioning layer of the shoes is made of a new mixture of materials called RECOIL™. This mixture of materials can perfectly absorb negative forces on impact and at the same time make excellent use of energy for each reflection. Recoil R™ - Recoil Reduction - technology to support the absorption of large shocks that act on the heel during sudden changes of direction and with each step.

Hexagrip
A completely new technology used in the new Salming Kobra and Salming Adder shoes. The sole is made of a special HX120 compound, which in combination with the Salming Hexagrip pattern ensures unusual grip on all types of surfaces.

T.G.S. 62/75°
Torsion Guide System. The distance from the heel to the abdomen of the foot (62% of the sole) has been designed with maximum stability and shock absorption in mind. This area is terminated by the so-called The ballet line, which ends this stabilizing part at an angle of 75%. Behind this ballet line, on the other hand, the shoes are equipped with a material that supports and stimulates the reflection while running. The TGS 62/75 technology works with all the phases that the foot goes through while running. On impact, the right part of the shoe absorbs the impact and helps to stabilize, then the sole bends in exactly the right place and the material in the front stimulates the reflection. All this with a single impact of the foot on the ground.